YW-JFZ-30
YW-JFZ-30 Liquid Cooling Dummy Load
The liquid cooling dummy load simulates real electrical heating conditions. It can accurately simulate loads, and multi-level combinations can simulate different server heating states. It is used in data centers and communication rooms to test refrigeration-system performance and ensure stable equipment operation.
Discuss this productFeatures & technical specifications1 specification table
Product features
- Temperature-limited heating and over-pressure difference protection shutoff
- Sanitary-grade pipelines with high-precision filtration
- Accurate simulation of server flow resistance
- Adjustable power and adaptable electrical interfaces
- HMI displaying real-time operating parameters
- Leakage detection
- Water leakage, electric leakage, overtemperature, grounding and overpressure protection
- Sealed without PTFE tape or sealant.
- Overtemperature alarm at 80Β°C; electric-leakage protection to prevent short circuits.
| Parameter | YW-JFZ-30 |
|---|---|
| Rated heat exchange power | 30KW |
| Power supply | 220VAC /1Ph50-60Hz |
| Withstand pressure | 10bar |
| Air tightness | No leakage for 2 hours at 1.2MPa |
| Insulation class | Class F |
| Inlet liquid temperature range | 5β-75β |
| Dimensions | 483x262x827mm |
Reference conditions & selection notes
- The source distinguishes 10 bar withstand pressure from the air-tightness test: no leakage for 2 hours at 1.2 MPa.
- The inlet-fluid range is 5β75Β°C; the safety description separately gives an 80Β°C overtemperature alarm.
Liquid Cooling Manual, p. 11